2013年5月3日星期五

knowledge for installing speakers on nissan 2012

DIY Altima dash removal / radio replacement


Ok time to takle the altima dash.

1. Remove all cd's out of stock head unit

2. Disconnect the negative battery terminal under the hood

3. Using a pry tool work the air vents loose and remove them. Disconnect both the hazard harness and the air bag light. NOTE Remember to have you negative battery terminal off.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

4. After removing the vents this will expose 2 Philips screws silver in color remove them.

Click the image to open in full size.

5. Next reach under the center and pull a small cover off exposing 2 silver screws remove these as well.

Click the image to open in full size.

Click the image to open in full size.

6. You are now ready to remove the radio. Using both hands one at the top and one at the bottom. Start pulling towards you working back and fourth as well. There will be a few wiring harnesses you will have to disconnect after you get the radio out.

Click the image to open in full size.

7. Radio removed
Click the image to open in full size.

8. Fallow your instructions of your new dash kit.

9. Install in reverse order

Click the image to open in full size.

没有评论: